How Simple Machines Work

What is a and how do they work? I"m so glad you asked! Machines make work easier by changing the size of force, direction of force, or distance the force acts on.

Lifting a car with a flat tire and loosening the lugnuts can be accomplished by a single person thanks to simple machines. The jack and lug wrench are simple machines that alter the force needed to change the tire.

Six Simple Machines

Simple machines are basic devices used to alter the force needed to accomplish a task. There are six types of simple machines.

  • lever
  • wheel and axle
  • inclined plane
  • wedge
  • screw
  • pulley

The first type of simple machine is the lever. A lever is a rigid bar that rotates on the fixed point of a fulcrum and changes the distance or size of a force.

There are three classes of levers. A first class lever has an input force and output force on either side of the fulcrum. This causes the output to move in the opposite direction of the the input force. An example of a first class lever is a see-saw. A second class lever has an output force between the input force and fulcrum. This changes the distance of the force. A wheelbarrow is a second class lever. The third class lever has the input force between the output and fulcrum. A broom is a third class lever.

Wheel and Axle

The wheel and axle make work easier by changing the distance the force acts on. A wheel and axle consists of two disks or

cylinders with different radiuses. Examples are a steering wheel and shaft, a car wheel and axle, and a screwdriver.

Inclined Plane

An is a slanted surface on which a force can move an object to a different elevation. Why do gentler slopes and ramps require less energy to move a load on? Because the input force required to travel the greater distance of a slope is changed to the smaller distance of the output force – the upward motion.

A wedge is a device made of two back to back inclined planes and is used to split objects. When a wedge is driven into a log, the size of the input force at the wider top of the wedge is changed to greater output force at the narrower point forcing the wedge through the wood. Knife blades are an example of a wedge.

A screw is an inclined plane wrapped around a cylinder. Screws with threads closer together require

less force to turn because the length of the inclined plane is longer. Nuts and bolts are screws. A nut is a screw with the threads on the inside.

The last type of simple machine is the pulley. A pulley consists of a rope that fits into a groove in a wheel. A pulley makes work easier by changing the direction or direction and size of the force.

There are three . They are the fixed pulley, moveable pulley and pulley system.

The fixed pulley is a single fixed pulley and rope. This changes the output direction of the force, making it opposite of the input. When you pull down on a fixed pulley a weight is lifted up.

A moveable pulley is fixed to the object being moved instead of a fixed location. Moveable pulleys multiply the input force needed to lift a heavy object thus reducing the force needed to lift heavy objects. Moveable pulleys are used to move ship sails and window washer platforms.

Pulley systems combine fixed and moveable pulleys to create large mechanical advantages. A crane uses pulley systems to lift enormous loads like locomotives.

References

  • Michael Wysession, David Frank, Sophia Yancopoulos. Physical Science Concepts in Action. p.417 – 435. New Jersey: Prentice Hall, 2004.

Simple machines can be used to make work easier and faster. Compound machines are basically simple machines placed together to work together. Work is force acting on an object that moves it a distance (W=F*d). A simple machine must have some force applied to it to do work. Simple machines let us use a small force to beat bigger forces. They can also change the direction of the force. Keep in mind that a simple machine cannot create energy (F input * d input = F output * d output). If you want the force output to be big and distance output to be small, you need to have a big distance input and a small force input. If you want the force output to be small and the distance output to be large, then the force input needs to be large and the distance input to be small (Fd = Fd). There are three simple machines will be focus on for this project: lever, pulley, and wheel and axle. .
The lever is used in seesaws, shovels, hammers, and other everyday objects. A lever consists of three main parts: the fulcrum, rod, and the load the machine is acting on it. The fulcrum, or fixed point, allows the rod to move up and down freely. There are three classes of levers, but for this project a will be using the second-class lever. This lever allows us to use less force to act on the load. In other words, less force and more distance will be inputted to result in more force and less distance. This kind of lever in usually used to move heavy objects. The fulcrum is closer to the load to achieve this. This simple machine will probably be the best to lift the soda can. Most of the lever can be built out of wood. The fulcrum may be made out of metal or wood. .
The pulley is used in cranes. Pulleys usually lift the load. A pulley changes the direction in the force to do that. A pulley is used to change the direction of the force. It can also multiply forces depending on the type. In this project a type one and two pulley will be used.


Essays Related to Simple Machines

1.

Technology and machines have become more advanced we have grown accustomed to having machines such as computers and cars in our everyday lives. Our own machines will soon surpass our own intelligence. ... Machines have played a vital role in our lives. ... When they were first created a computer that had the power of one of today"s simple five dollar calculators required so much space to hold all of their necessary equipment it could take up a whole room, but the simple machine known today can be made so small it can not even be handled by a human due to its s...

  • Word Count: 1272
  • Approx Pages: 5
  • Grade Level: High School

2.

AI is the attempt to make machines, specifically computers, perform intelligently through programming. ... It could be said that the human brain is nothing more than a machine, and as we know it to be capable of thought it would be fair to surmise that therefore machines can think and it is probably this, or a similar premise that inspired AI. ... This argument is an attempt to demonstrate that although a computer program appears to be understanding a story, it is merely obeying simple instructions, and has no understanding at all. ... But what are these natural causal properties, and from ...

  • Word Count: 1323
  • Approx Pages: 5
  • Has Bibliography

3.

In The Time Machine by H.G Wells, Wells portrays the future to an exact detail. ... The Eloi are simple and beautiful creatures, but the Time Traveler thinks of them as weak and lazy. ... Through the Time Machine Wells warns that mankind will come to end if capitalism continues. ... Social Darwinism and evolution are presented throughout the Time Machine. ... Well"s uses the Time Machine to project what he believes the future will be. ...

  • Word Count: 1454
  • Approx Pages: 6
  • Grade Level: High School

4.

Rage Against The Machine At first thought a band standing on stage naked for 15 minutes without saying a word or playing a single note might seem lewd, but after finding that they were silently protesting censorship one might think differently of them. Rage Against the Machine (RATM) is probably one of the most atypical bands that one could ever find. ... Believe it or not there are bands who care less about money and more about issues and Rage Against the Machine is one of them. ... The majority of their songs were primarily written as activist poetry by Zack de la Rocha (lead singer ...

  • Word Count: 519
  • Approx Pages: 2

5.

ABSTRACT Complex system theory in animals and machines is well developed and a basic synopsis is provided. ... These ideas have been applied in the field of Engineering to develop machines for controlling states of objects or events: a simple temperature control system is used as a model. ... This process, is the modern basis of the modern theory regarding the evolution of life, which in simple terms can be described as the process of prolonging a type of structure through; duplication, reproduction or other processes. ... A basic comparison of control systems in nature and machines can b...

  • Word Count: 908
  • Approx Pages: 4
  • Has Bibliography
  • Grade Level: Undergraduate

6.

Personally thinking, technology makes people"s life simpler than making people"s lives more complicated because newly developed devices, improvement of living condition and efficient transportation. ... All of those technologies can help people get a simpler and easier lives. ... Thus, technology has more benefits can be discovered, and it make lives simpler rather than more complicated. In conclusion, although technology may be a little bit complicated, when we count it use on machines, communication, information, and transportation, it is more pure and effortless for our lives. ...

  • Word Count: 787
  • Approx Pages: 3
  • Has Bibliography
  • Grade Level: Undergraduate

7.

A simple distinction between both groups is that humans depend on organization where as animals do not. The Time Machine by H.G. ... Unlike the Eloi, the Morlocks have a curiosity for knowledge which is why they take the time machine. ... When the time machine is returned to him, he notices that it is very clean and well oiled. ... Wells illustrates this quite well in The Time Machine. ...

Or . However, some of the most important and useful machines are quite simple. In fact, scientists even call them simple machines!

So what is a simple machine? Is it a machine that does a simple , such as addition or ? Maybe it"s just a machine that"s really easy to operate, like an old television remote control? Or could it be any machine that makes life easier?

While simple machines do make our lives easier, they"re much older than either television remotes or calculators. Simple machines are some of the first machines ever created.

Since the earliest human beings walked on Earth, they looked for ways to make the of everyday life easier to accomplish. Over time, they did this by inventing what has become known as the six simple machines.

Wedges are moving inclined planes used to lift or separate. Wedges are usually used to cut, tear, or break an object into pieces. Common wedges include knives, axes, saws, scissors, and shovels. However, wedges can also be used to hold things in place, such as in the case of staples, nails, shims, or doorstops.

A is a twisted version of an inclined plane. It allows movement to be translated into an up or down motion that takes up less space. Screws can also help hold things together. Common examples of screws include jar lids, drills, light bulbs, and bottle caps.

These six simple machines are all around us. Often more machines, also called machines, consist of one or more of the simple machines put together. Can you imagine how much easier life became after the invention of these simple machines?

Of course, depending on the gun. Some are a lot more simple than others. All are “simply” machines, but not all are “Simple” machines.

A matchlock, from the 1600’s was simple, very simple, and a modern electric gatling gun, not so simple.

Col. Colt literally went broke because his first revolver, the Paterson Colt was not simple enough.

He built a large supply of revolving guns, on credit, then tried to sell them to the U.S. Army, who rejected the gun as being too fragile and too complex for use in the field.

The existing muzzle-loading pistols only had 3 moving parts, all simple to get to and to repair.

The Paterson had no trigger guard. Rather, the trigger was recessed in the frame, and when the hammer was cocked, the trigger was pushed out where it could be squeezed.

Also you had a revolving cylinder, and linkage with the hammer to move the cylinder and to index the next chamber with the barrel.

And there was added linkage from the hammer, to push the trigger out into firing position and retract it afterwards.

It had well over double the number of moving parts of a single-shot, requiring more parts inventory in the field, and repairs only by a skilled armorer, when something quit working, plus possibility of powder fouling or mud jamming the cylinder. A very few initial guns were bought as a trial, then the design was rejected completely.

So, he couldn’t sell his guns to the U.S. Army, and worse than THAT, they acquired a stink that kept them from selling in the civilian market.

Since they weren’t good enough for the Army, why would anyone else want one?

That was until The Republic Of Texas came along.

Until that time, Colt Patent Firearms was nearly done for… they were already entering bankruptcy proceedings. `

Texas put in a large order, pretty much emptying that warehouse full of guns that nobody wanted except Sam Colt’s creditors.

The first thing was that the immediate money from that order saved Colt from bankruptcy by the skin of his teeth.

The next, more important thing was that The Texas Army, Texas Navy, and (especially) The Texas Rangers used them, which created the civilian market that the U.S. Army had destroyed for him.

In The Battle Of The Bay Of Campeche, the Texas Navy defeated the Mexican Navy, and as a nod to The Republic Of Texas, Colt produced the model 1851 Navy with an engraved cylinder standard, depicting this naval battle.

In addition, to creating a market, the Rangers found a few design flaws, so Captain John Coffee Hays and Capt. Samuel Walker (The Walker Colt ) went to Connecticut with plans for design changes.

The result was The Colt Patterson #5 Holster model, marketed by Colt as “The Texas Paterson”.

The original concept was that the Paterson was an infantry weapon. When you fired your five shots, you could lay flat on the ground, partially disassemble it for reloading, then re-assemble and go on fighting.

The most important use of Colt Revolvers was by The Texas Rangers, who often had to fight Indians on horseback.

To reload the gun, you had to remove the barrel wedge, then remove the barrel, then stuff powder and ball into each chamber with a special supplied tool, then follow those steps in reverse.

If the cylinder, barrel, or barrel wedge fell out of your hands, the gun was useless.

Most Rangers got around that by wearing a sash around their waist and sticking loose parts in there while they just switched in a spare loaded cylinder.

That was in addition to carrying two revolvers, so they had a better chance of getting through an encounter without having to actually stuff powder and balls into the chambers to reload.

So the two most major changes the went to Sam Colt with was to increase caliber from .28 to .36 and produce a different shape on the grip.

Then two years later, Captain Hayes campaigned for the addition of a loading lever, and a capping port in the rear, so no disassembly was required to reload on the back of a galloping horse. Colt made the change to the Texas Paterson.

The Comanche sometimes wore breastplates made of 18-inch lengths of reeds packed in dried mud, and this would often stop a light little .28 caliber ball.

Captain John Coffee Hayes (Called “Devil Jack” by local Indians) first introduced The Comanche to Colt Patent Firearms at The Battle Of Enchanted Rock , in 1841.

He was a surveyor by trade, and climbed to the top of the highest feature in the area, (Enchanted Rock) to have a good look at the lay of the land.

Unfortunately, Enchanted Rock was sacred to both the Comanche and Tonkawa tribes, who believed that evil spirits lived there and are rumored to have made human sacrifices at the base of the rock to keep from getting on the bad side of the spirits. The Comanches caught him alone up there.

In a 3-hour solo battle, he killed them until they took refuge in caves at the base of the rock.

How many of them he killed, before they hid from him, depends on whom you ask, but the lowest count is 15.

Enchanted Rock was already believed by them to be home to evil spirits, and they became convinced that those spirits were on the side of Hays, or that he was actually one OF them.

He had two Texas Patersons, a rifle and a Bowie Knife with him.

Standard Indian tactic was to goad a Ranger into shooting OR shooting AT three of them in quick succession, then charging in for a kill before any reloading of his two pistols and a rifle could happen.

That’s how it worked with two single-shot pistols and a single-shot rifle.

Enchanted Rock was their first exposure to someone who could fire 11 shots without reloading.

At one point, he killed a couple of them climbing up after him with his Bowie Knife, another piece of standard equipment for Rangers.

И стал называться YaBB SE .

По мере того как YaBB SE развивался, он становился все больше, и к тому времени появились некоторые аспекты, требующие переделки и усовершенствования проекта. Было принято решение, что лучше всего отделиться от YaBB SE , потому как это было нечто иное, чем YaBB. Самым правильным решением было отказаться от всего что наработано и начать все заново. С этого и началось развитие SMF .

29 сентября 2003 года была выпущена первая версия SMF 1.0 beta1 , которая распространялась только для группы Charter Member . Это было большим минусом, так как форум мог использовать только ограниченный круг людей, входивших в состав данной группы. 10 марта 2004 года вышел первый общедоступный релиз SMF . Веб-форумы на базе SMF 1.1 : ami.lv и не менее популярный iratbildes.lv .

SMF создавался как замена интернет-форуму YaBB SE , который приобрел плохую репутацию из-за проблем его аналога, разработанного на Perl с подобным названием - YaBB .

Первые версии YaBB были известны проблемой производительности и были требовательны к ресурсам. YaBB SE был написан как примерный PHP -порт YaBB , но при этом он был менее требователен к ресурсам и даже лишён проблем с безопасностью.

SMF стартовал как небольшой проект одного из разработчиков YaBB SE , и с целью расширить возможности шаблонов YaBB SE . С тех пор проект постепенно расширялся: добавлялась общая функциональность «заказанная» пользователями, решались проблемы производительности и вопросы безопасности.

Версия 2.0 форума объявлена 8 апреля 2007. Публичный бета-релиз был выпущен 17 марта 2008. К основным нововведениям относятся :

  • Абстракция базы данных: планируется поддержка PostgreSQL и SQLite .
  • Центр модерации, объединяющий все функции модерации для всех модераторов, а также позволяющий осуществлять премодерацию тем, сообщений и вложений, если это будет необходимо.
  • Система предупреждений пользователей
  • Дополнительное управление группами пользователей такими как модераторы, а также свободные группы и группы по запросу.
  • Поддержка OpenID . Возможность использовать OpenID -аккаунт для регистрации и входа на форум.
  • Дополнительные поля в профилях пользователей.
  • WYSIWYG -редактор для обеспечения интуитивно понятного интерфейса пользователя.
  • Диспетчер задач и система очереди сообщений

Исходный код проекта доступен в публичном репозитории на GitHub github.com/SimpleMachines/SMF2.1

Лицензия

SMF 1.0 и 1.1 публикуются под проприетарной лицензией. В то время как с открытым исходным кодом, перераспределение и / или распространение модифицированных компонентов ограничено уполномоченным органам.

Simple Machines Forum версии 2.0 и 2.1 под лицензией BSD 3-п . Это также открытый исходный код с перераспределением модифицированного кода в зависимости от требований к BSD.

Локализация

Команда SMF

Над SMF работают более 50 человек , в том числе:

  • 3 менеджера
  • 6 разработчиков
  • 3 документатора

Девиз команды: «Малочисленные, гордые, увлечённые!» (The few, the proud, the geeky! (англ.) )

См. также

Напишите отзыв о статье "Simple Machines Forum"

Примечания

Литература

  • Phil Hughes (англ.) // Linux Journal . - 2008. - 4 марта.

Ссылки

  • - официальный сайт Simple Machines Forum (англ.)
  • (рус.)
  • (рус.)

Отрывок, характеризующий Simple Machines Forum

По опекунским делам рязанского именья, князю Андрею надо было видеться с уездным предводителем. Предводителем был граф Илья Андреич Ростов, и князь Андрей в середине мая поехал к нему.
Был уже жаркий период весны. Лес уже весь оделся, была пыль и было так жарко, что проезжая мимо воды, хотелось купаться.
Князь Андрей, невеселый и озабоченный соображениями о том, что и что ему нужно о делах спросить у предводителя, подъезжал по аллее сада к отрадненскому дому Ростовых. Вправо из за деревьев он услыхал женский, веселый крик, и увидал бегущую на перерез его коляски толпу девушек. Впереди других ближе, подбегала к коляске черноволосая, очень тоненькая, странно тоненькая, черноглазая девушка в желтом ситцевом платье, повязанная белым носовым платком, из под которого выбивались пряди расчесавшихся волос. Девушка что то кричала, но узнав чужого, не взглянув на него, со смехом побежала назад.
Князю Андрею вдруг стало от чего то больно. День был так хорош, солнце так ярко, кругом всё так весело; а эта тоненькая и хорошенькая девушка не знала и не хотела знать про его существование и была довольна, и счастлива какой то своей отдельной, – верно глупой – но веселой и счастливой жизнию. «Чему она так рада? о чем она думает! Не об уставе военном, не об устройстве рязанских оброчных. О чем она думает? И чем она счастлива?» невольно с любопытством спрашивал себя князь Андрей.
Граф Илья Андреич в 1809 м году жил в Отрадном всё так же как и прежде, то есть принимая почти всю губернию, с охотами, театрами, обедами и музыкантами. Он, как всякому новому гостю, был рад князю Андрею, и почти насильно оставил его ночевать.
В продолжение скучного дня, во время которого князя Андрея занимали старшие хозяева и почетнейшие из гостей, которыми по случаю приближающихся именин был полон дом старого графа, Болконский несколько раз взглядывая на Наташу чему то смеявшуюся и веселившуюся между другой молодой половиной общества, всё спрашивал себя: «о чем она думает? Чему она так рада!».
Вечером оставшись один на новом месте, он долго не мог заснуть. Он читал, потом потушил свечу и опять зажег ее. В комнате с закрытыми изнутри ставнями было жарко. Он досадовал на этого глупого старика (так он называл Ростова), который задержал его, уверяя, что нужные бумаги в городе, не доставлены еще, досадовал на себя за то, что остался.
Князь Андрей встал и подошел к окну, чтобы отворить его. Как только он открыл ставни, лунный свет, как будто он настороже у окна давно ждал этого, ворвался в комнату. Он отворил окно. Ночь была свежая и неподвижно светлая. Перед самым окном был ряд подстриженных дерев, черных с одной и серебристо освещенных с другой стороны. Под деревами была какая то сочная, мокрая, кудрявая растительность с серебристыми кое где листьями и стеблями. Далее за черными деревами была какая то блестящая росой крыша, правее большое кудрявое дерево, с ярко белым стволом и сучьями, и выше его почти полная луна на светлом, почти беззвездном, весеннем небе. Князь Андрей облокотился на окно и глаза его остановились на этом небе.
Комната князя Андрея была в среднем этаже; в комнатах над ним тоже жили и не спали. Он услыхал сверху женский говор.
– Только еще один раз, – сказал сверху женский голос, который сейчас узнал князь Андрей.
– Да когда же ты спать будешь? – отвечал другой голос.
– Я не буду, я не могу спать, что ж мне делать! Ну, последний раз…
Два женские голоса запели какую то музыкальную фразу, составлявшую конец чего то.
– Ах какая прелесть! Ну теперь спать, и конец.
– Ты спи, а я не могу, – отвечал первый голос, приблизившийся к окну. Она видимо совсем высунулась в окно, потому что слышно было шуршанье ее платья и даже дыханье. Всё затихло и окаменело, как и луна и ее свет и тени. Князь Андрей тоже боялся пошевелиться, чтобы не выдать своего невольного присутствия.
– Соня! Соня! – послышался опять первый голос. – Ну как можно спать! Да ты посмотри, что за прелесть! Ах, какая прелесть! Да проснись же, Соня, – сказала она почти со слезами в голосе. – Ведь этакой прелестной ночи никогда, никогда не бывало.
Соня неохотно что то отвечала.
– Нет, ты посмотри, что за луна!… Ах, какая прелесть! Ты поди сюда. Душенька, голубушка, поди сюда. Ну, видишь? Так бы вот села на корточки, вот так, подхватила бы себя под коленки, – туже, как можно туже – натужиться надо. Вот так!
– Полно, ты упадешь.
Послышалась борьба и недовольный голос Сони: «Ведь второй час».
– Ах, ты только всё портишь мне. Ну, иди, иди.
Опять всё замолкло, но князь Андрей знал, что она всё еще сидит тут, он слышал иногда тихое шевеленье, иногда вздохи.
– Ах… Боже мой! Боже мой! что ж это такое! – вдруг вскрикнула она. – Спать так спать! – и захлопнула окно.
«И дела нет до моего существования!» подумал князь Андрей в то время, как он прислушивался к ее говору, почему то ожидая и боясь, что она скажет что нибудь про него. – «И опять она! И как нарочно!» думал он. В душе его вдруг поднялась такая неожиданная путаница молодых мыслей и надежд, противоречащих всей его жизни, что он, чувствуя себя не в силах уяснить себе свое состояние, тотчас же заснул.

На другой день простившись только с одним графом, не дождавшись выхода дам, князь Андрей поехал домой.
Уже было начало июня, когда князь Андрей, возвращаясь домой, въехал опять в ту березовую рощу, в которой этот старый, корявый дуб так странно и памятно поразил его. Бубенчики еще глуше звенели в лесу, чем полтора месяца тому назад; всё было полно, тенисто и густо; и молодые ели, рассыпанные по лесу, не нарушали общей красоты и, подделываясь под общий характер, нежно зеленели пушистыми молодыми побегами.
Целый день был жаркий, где то собиралась гроза, но только небольшая тучка брызнула на пыль дороги и на сочные листья. Левая сторона леса была темна, в тени; правая мокрая, глянцовитая блестела на солнце, чуть колыхаясь от ветра. Всё было в цвету; соловьи трещали и перекатывались то близко, то далеко.
«Да, здесь, в этом лесу был этот дуб, с которым мы были согласны», подумал князь Андрей. «Да где он», подумал опять князь Андрей, глядя на левую сторону дороги и сам того не зная, не узнавая его, любовался тем дубом, которого он искал. Старый дуб, весь преображенный, раскинувшись шатром сочной, темной зелени, млел, чуть колыхаясь в лучах вечернего солнца. Ни корявых пальцев, ни болячек, ни старого недоверия и горя, – ничего не было видно. Сквозь жесткую, столетнюю кору пробились без сучков сочные, молодые листья, так что верить нельзя было, что этот старик произвел их. «Да, это тот самый дуб», подумал князь Андрей, и на него вдруг нашло беспричинное, весеннее чувство радости и обновления. Все лучшие минуты его жизни вдруг в одно и то же время вспомнились ему. И Аустерлиц с высоким небом, и мертвое, укоризненное лицо жены, и Пьер на пароме, и девочка, взволнованная красотою ночи, и эта ночь, и луна, – и всё это вдруг вспомнилось ему.